Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Seat
Model Year: 2008 Model: Sequoia Doc ID: RM000003GTV000X
Title: SEAT: REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type RH Side): REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

2. REMOVE LUGGAGE COMPARTMENT TRIM BOX INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

3. REMOVE ROPE HOOK ASSEMBLY INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

4. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

5. REMOVE DECK BOARD REINFORCEMENT SUB-ASSEMBLY INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

6. REMOVE DECK BOARD BRACKET INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

7. REMOVE SEAT TRACK BRACKET FRONT COVER OUTER

(a) Disengage the 2 claws in the order shown in the illustration, and then remove the seat track bracket front cover outer.

8. REMOVE SEAT TRACK BRACKET FRONT COVER INNER

(a) Disengage the clip and claw and 2 guides in the order shown in the illustration, and then remove the seat track bracket front cover inner.

9. REMOVE REAR NO. 2 SEAT ASSEMBLY RH

(a) Remove the 2 bolts.

(b) Remove the 2 bolts.

(c) Remove the connector.

(d) Remove the rear No. 2 seat assembly RH.

NOTICE:

Be careful not to damage the vehicle body.